+- IRSE Exam Forum (https://irse.signalpost.org)
+-- Forum: MODULES (https://irse.signalpost.org/forumdisplay.php?fid=3)
+--- Forum: Module 1 (https://irse.signalpost.org/forumdisplay.php?fid=4)
+---- Forum: Studying for module 1 (https://irse.signalpost.org/forumdisplay.php?fid=78)
+---- Thread: Module 1 David Nicholson YM AGM 2012 (/showthread.php?tid=962)
Module 1 David Nicholson YM AGM 2012 - PJW - 27-01-2012
David has made available a version of his presentation (including notes) which he gave earlier this week at the Younger Members AGM and seminar.
This introduces the concepts of safety / hazard / risk / accident etc. as an introduction to the compulsory module of the examination.
RE: Module 1 David Nicholson YM AGM 2012 - pieman31 - 28-01-2012
An interesting read, particularly as it made me think on my answers to the Mod 1 exam last October.... For Q3 I seem to remember rattling off a load of info regarding Tempory Block Working, a legacy of my time in Operations I suspect. I'll stand by my answer in saying that TBW could be used to pass trains through the affected section (not sure about it being quick these days) but I'm not sure I captured the risks associated with this method of working effectively. And, given that 12 marks were set aside for risk identification, it could well explain a fundamental reason for me failing this module.
For me then, it seems that I need to concentrate on hazard identification in whole system terms. In this particular instance, I understood the problem (power failure) and knew an affective solution (TBW), I just didn't recognise why TBW is SAFER than say, talking past each defective signal etc. and what risks are associated with the situation before I arrived and more importantly why I arrived at TBW.
I think I also answered Questions 5 and 8, but don't recall much about what I wrote..... or maybe I don't want too!!
RE: Module 1 David Nicholson YM AGM 2012 - Jerry1237 - 30-01-2012
pieman,
Maybe you could request a session on hazard identification, mitigation and risk assessment on one of the M1 days. I am sure it would benefit many.
RE: Module 1 David Nicholson YM AGM 2012 - PJW - 07-03-2012
Suggest you try to come to Birmingham at the end of this month having had another go;
see http://www.irseexam.co.uk/thread-979-post-3441.html#pid3441
(28-01-2012, 06:51 PM)pieman31 Wrote: An interesting read, particularly as it made me think on my answers to the Mod 1 exam last October.... For Q3 I seem to remember rattling off a load of info regarding Tempory Block Working, a legacy of my time in Operations I suspect. I'll stand by my answer in saying that TBW could be used to pass trains through the affected section (not sure about it being quick these days) but I'm not sure I captured the risks associated with this method of working effectively. And, given that 12 marks were set aside for risk identification, it could well explain a fundamental reason for me failing this module.
For me then, it seems that I need to concentrate on hazard identification in whole system terms. In this particular instance, I understood the problem (power failure) and knew an affective solution (TBW), I just didn't recognise why TBW is SAFER than say, talking past each defective signal etc. and what risks are associated with the situation before I arrived and more importantly why I arrived at TBW.
I think I also answered Questions 5 and 8, but don't recall much about what I wrote..... or maybe I don't want too!!